Vectra C Diagnostic Software

Posted on by

  1. Diagnostic Software Definition
  2. Vectra C Diagnostic Software Download
  3. Vectra C Diagnostic Software Free
  4. Vectra C Diagnostic Software Reviews

Description

  1. The Abrites diagnostics for GM (former Opel/Vauxhall) is the product of our team's development on all vehicles from the GM Group. Currently the software has support for ALL functionalities that were part of the OPEL/Vauxhall software as well as basic diagnostics for all brands in the GM group and also key learning for certain Cadillac, Buick, Chevrolet and General Motors models.
  2. OPCOM is a special automotive diagnostic software for Opel/Vauxhall,which run on Window operation system.Opcom VAUX-COM software covers a wide range of Opel/Vauxhall cars from 1990-2017,and latest are also included!
AutoScanner Opel CAN is a software and hardware solution (also known as OpelScan, Opel-Scan, Opel-Scanner) for Opel diagnostics and some advanced functions.
The kit includes also our USB security dongle, which will allow you to activate any of our Pro or Flasher licenses.

Mileage correction for some dashboard types (through the diagnostic link connector) Vectra B 1996-2002. VDO, Astra G VDO, Zafira A (till 2000). Transponder keys replacement for immobilizers of the first (IMMO1), second (IMMO2) and third (IMMO3 Vectra C, Astra H, Corsa D) generation (login is required).

Attention!! The licenses are not included, they need to be purchased separately.

It supports the following models:

Vectra
  • Agila-A(1998-2007);
  • Agila-B (2008-2010);
  • Antara (2007-2010);
  • Ascona (1987-1989);
  • Astra-F (1992-2002);
  • Astra-G (1998-2006);
  • Astra-H (2004-2010);
  • Astra-J (2010-);
  • Calibra (1990-1997);
  • Corsa-A/Combo (1987-1993);
  • Corsa (Vita)-B (1993-2000);
  • Corsa (Vita)-C (2001-2010);
  • Corsa (Vita)-D (2007-2010);
  • Frontera-A (1992-1998);
  • Frontera-B (1999-2003);
  • Insignia (2009-2010);
  • Kadett-E (1987-1991);
  • Meriva-A (2003-2009);
  • Meriva-B (2010-);
  • Omega-A (1987-1994);
  • Omega-B (1994-2003);
  • Senator-B (1987-1993);
  • Sintra (1997-1999);
  • Speedster/VX220 (2001-2006);
  • Tigra-A (1995-2000);
  • Tigra-B (2005-2010);
  • Vectra-A (1989-1995);
  • Vectra-B (1996-2001);
  • Vectra-C/Signum (2002-2010);
  • Zafira-A (1999-2005);
  • Zafira-B (2005-2010);
  • Suzuki Grand Vitara (2005-2010);
  • Saab 9-3 CAN (2002-2010);

Diagnostics of ALL electronic systems is supported on most models:

  • Engine Management Automatic;
  • Transmission Distributor Transmission 4WD;
  • ABS — Anti-Lock Brake System and ESP — Electronic Stability Program;
  • Traction Control;
  • Air Bag Immobilizer and ATWS — Anti-Theft Warning System;
  • Central Door Locking System;
  • Info Display;
  • Instrument;
  • Power Steering;
  • Audio System;
  • Air Conditioning System and Climate Control;
  • Sliding Roof;
  • Electronic Seat Memory;
  • Add-On Heater;
  • Headlamp Leveling Device;
  • And many others…

New models and systems are added regularly.

The following functions are available when working with the systems mentioned above:

  • Reading ID parameters of control units: VINs (stored, for example, in the ECU), unit numbers as a spare part, hardware and software (firmware) versions, system type or model (e.g. engine models for the ECU), etc.
  • Fault codes reading and clearing. Fault codes definition, error status (current or stored) and conditions under which the control unit registers the fault code.
  • Viewing the current parameters of the control system. Besides the list of digital values, one parameter is represented graphically in this mode. In addition, standard values are provided for a number of parameters.
  • Enhanced mode of parameters graphic analysis: in this mode you can see up to 4 charts of parameter variations simultaneously.
  • Actuators control: valves, nozzles, ignition coils, fans, indicator lamps, relays, controllers, etc. For some tests there are tooltips containing test realization conditions.
  • Memory (firmware) reading of some control units.
  • Mileage correction for some dashboard types (through the diagnostic link connector) Vectra B 1996-2002. VDO, Astra G VDO, Zafira A (till 2000).
  • Transponder keys replacement for immobilizers of the first (IMMO1), second (IMMO2) and third (IMMO3 Vectra C, Astra H, Corsa D) generation (login is required).
  • Trip computer (Board Computer) and control system (Check Control) enabling on some GID displays of Astra H and Zafira B
  • Programming of different modules configuration (including cruise control activation) and CAN network (low, medium and high speed) for some models.
  • Clutch bleeding and engagement point adjustment for robotized MTA of the following models: Astra H, Vectra C, Zafira B, Corsa D.

The device software has friendly interface and is regularly updated.

P/No. : vauxcom
Vectra c diagnostic software download

VAUX-COM Diagnostic Tester

Software

Vaux-COM is a Windows based piece of software that turns your PC into a sophisticated diagnostic tool, capable of diagnosing GM / Opel vehicles from 1994 to 2014, including Vectra C, Astra H and Insignia.

VAUX-COM PC based diagnostic tool covers almost all Vauxhall and Opel cars and light vans and allows you to diagnose almost all modules including the engine management, airbag, ABS, immobiliser, instruments and many more.

VAUX-COM can diagnose almost all Vauxhall / Opel systems including :

  • Automatic Transmission, including Easytonic, CVT and Tecshift types
  • ABS, Antilock Braking System, TC and ESP systems, including Steering angle sensor calibration
  • Tyre pressure Monitoring
  • Electrohydraulic and full electronic power steering
  • Immobiliser, including all key programming
  • Instrument cluster, including read write eeprom on many models
  • Seat memory and heating
  • Airbag and other crash systems
  • Electronic sunroof
  • Climate control. Including Astra H UEC, ECM and ECC re-config when compressor renewed
  • Headlamp levelling system
  • Park Pilot
  • CIM, including programming and configuring new units
  • Body Control Module, including configuring and variant coding
  • Rear Electrical Centre, including all reprogramming when replacing
  • Underbonnet Electrical Centre, including reprogramming
  • Driver and Passenger door modules
  • Shift Lever Module
  • Entertainment head Unit
  • DIS, UHP (mobile phone) and DAB units
  • PEPS Keyless entry (Open and Start)
  • Electrohydraulic Hardtop and SoftTop
  • Parking Heater

And works on almost all models including the latest CAN-BUS and Global A Platform cars

  • Agila A and Agila B 2001 - 2013
  • Antara 2006 - 2013
  • Astra F, Astra G, Astra H and Astra J 1987 - 2014 (limited programming on Astra J at the moment)
  • Calibra 1989 - 1997
  • Captiva / Captiva MaXX 2006 - 2011
  • Corsa A, Corsa B, Corsa C, Combo van and Corsa D - 1987 - 2014 (note Fiat based Combo D not yet covered)
  • Frontera A and Frontera B (limited coverage)
  • Insignia 2009 - 2013 (limited programming on Insignia at the moment)
  • Meriva A and Meriva B 2002 - 2013
  • Monteray (limited coverage)
  • Movano 1998 - 2012
  • Omega A and Omega B 1987 - 2003
  • Senator 1987 - 1993
  • Sintra 1996 - 1999
  • Speedster / VX220 2000 - 2005
  • Tigra and Tigra B 1994 - 2009
  • Vectra A, Vectra B and Vectra C / Signum 1988 - 2008
  • Vivaro 2001 - 2012
  • Zafira A and Zafira B 1999 - 2012

This PC / Laptop based tool replicates almost all the functions of the dealer 'TECH 2' tool for a fraction of the cost.

Supplied complete with the latest CAN-BUS interface VAUX-COM covers models made from 1997 to 2014 including Astra H, Corsa D, Vectra C, Captiva and Movano

Kit Contents

VAUX-COM comes complete with all the hardware and software to connect your PC or laptop computer to almost any Vauxhall car or light van Comes complete with:

Diagnostic Software Definition

  • 1 x USB hardware interface 16 pin
  • Software on CD-ROM
  • Printed installation instructions
  • User manual on CD-ROM
  • Free Software upgrades by internet download

Reading Fault Codes

VAUX-COM can read and clear fault codes from almost all Vauxhall cars and light vans. It's easy to use and all the fault codes are shown with the Vauxhall DTC number and the full English text meaning for the code.

Vectra C Diagnostic Software Download

Clicking on any displayed code will show more details about the code including whether the code is present (fault exists now) or intermittent (fault occured in the past but is no longer present). From the fault code screen you can also choose to print a copy or save them to your usual word proccesor, windows notepad or email etc.

Vectra C Diagnostic Software Free

Viewing Live Sensor Data

What is diagnostic software

VAUX-COM also allows you to view live sensor data from most modules. This is helpful when determining why a fault code has been set.

Actuator and Output Tests

VAUX-COM can also operate some relays, soleniods and other actuators to help test systems. For example an EGR valve can be operated by the VAUX-COM software and you can actualy see if the valve works. If you are trying to test a fuel pump you can control the power relay and test the circuit Even the instruments can be operated by the VAUX-COM diagnostic tool Each gauge and warning light can be individually controlled so the next time a customer reports a fuel gauge not working you can view the live data to test the tank fuel level sender and then operate the gauge with your laptop to prove where the fault lies. This level of diagnostic power takes the guess work out of the job and gives you the confidence to order parts knowing they will be used and paid for.

Programming & Setting Changes

Vaux-Com can also carry out many programming or setting changes available on the specific vehicles, such as dashboard and engine management, as well as coding to items such as keys, remotes, sensors and modules.

Vectra c diagnostic software reviews

Hardware Details

Vectra C Diagnostic Software Reviews

VAUX-COM comes complete with a genuine intelligent microprocessor powered interface which is firmware upgradable. This means that as new features are added to new car models, the interface can be upgraded automatically by the software to incorporate them

The hardware interface:

  • Has all current diagnostic speeds and CAN-BUS
  • Can be upgraded automatically by software
  • Automatically selects the correct pin for the module being tested
  • Is designed as a genuine USB device. No compatibility problems
  • Covers all vehicles from 1994 to 2014 (10 pin adapter needed for pre 1997)

Because Vauxhall use many different pins in the diagnostic socket, the interface has been designed to automatically select the correct pin for the system that is being worked on.

All currently used communication speeds are included as well as low, medium and high speed CAN-BUS for later vehicles such as the Vectra C.

LEDs on the interface show you what is happening as you use the tool.

The USB cable is three meters long and we can supply an extension to take this to 6 or even 8 meters if you need it.

The design uses the latest technology to pack all the components into a slimline case which allows the interface to be used on all known Vauxhall cars and light vans (Note DLC locations for Vauxhall models are included in the manual that comes with this tool).

This is a durable tool which will give many years of service and comes complete with software which is in constant development to add new features and models as they are introduced by Vauxhall